The Indac Wallace Seal has been specially designed to make the fitting of overflow pipes and down pipes to polyethylene tanks simple and reliable. Just drill a hole, fit the seal and push in the pipe. Suits curved and flat surfaces.
FEATURES Unique multiple lips ensures a high integrity seal Easy to install, you only require the right sized Hole saw and drill Accommodates tank thickness up to 15mm Tested to 4 metres of Head. Using PVC with a non migratory plasticiser the Indac Wallace Seal creates a semi-flexible joint between pipe and tank.
| SIZES AVAILABLE | ||
|---|---|---|
| Description | Suitable for | Hole Saw |
| XWS25PP | 25mm Pressure Pipe to AS/NZ 1477.2 | 44mm |
| XWS50SW | 50mm Drain Waste & Vent to AS/NZS 1260 | 65mm |
| XWS65SW | 65mm Drain Waste & Vent to AS/NZS 1260 | 76mm |
| XWS80SW | 80mm Drain Waste & Vent to AS/NZS 1260 | 89mm |
| XWS90SW | 90mm Storm water AS/NZ 1254 | 98mm |
| XWS100SW | 100mm Storm water AS/NZ 1254 and Drain Waste & Vent AS/NZ 1260 | 121mm |
| XWS150DWV | 150mm Drain Waste & Vent to AS/NZS 1260 | 168mm |
